Bona Flooring Freshen Up
Bona Flooring Freshen Up is in the category Bona Kemi Cleaners

Bona Freshen Up is ready to use (but should be shaken first), waterbourne and specifically designed for the maintenance for any prefinished or lacquered wooden floors in both commercial and domestic areas. It revives a scratched and dull surface giving a newly finished look and protection against wear. Freshen Up contains no waxes which allows a surface maintained with Freshen Up to be easily overcoated without having to be sanded back to bare wood.
Information
- Freshen up is ready to use but should be shaken
- Freshen up may be easily removed using Bona Polish Remover to allow the application of further coats of lacquer
- Freshen Up may be used on lacquered floors previously treated with polishes or maintainers containing wax, providing that the surface has been effectively treated with polish remover to remove all previous treatments
- Can be used with matt, silkmatt, and gloss finishes without affecting sheen level
- Specifically designed for finished wooden floors.
- Suitable for both residential and commercial locations.
- Based on polyurethane = superb protective qualities.
- Allows future applications of finish, using the Prep System.
- Meets DIN 18 032 for slip resistance.
Application:Apply using a cloth or mop
Coverage:Approximately 60-70 M squared/Litre
Directions for use:
Step 1. Remove all loose dirt and grit from floor. Clean the floor thoroughly with Bona Cleaner. Repeat to ensure that no dirt will be trapped in the coating. Make sure the floor is completely dry before applying Freshen Up.
Step 2. Rock the container back and forth before opening. Apply the Freshen Up using the Bona Applicator pad, slightly dampened with water.
Step 3. Spread Freshen up over an entire section of the flooring, ensuring all wood is covered. Freshen up should ideally be applied at a rate of 30-50M2 per litre. For best results apply a thin, consistent coat. Minimise airbourne dust and airflow while the floor is wet.
Step 4. Even out the Freshen Up, going with the grain of the wood. Continue this process until the entire floor has been coated. Allow to dry for at leats two hours before walking on coated floors. If needed apply a second coat once dry. Always coat the entire floor to ensure an even appearance and sheen.
Avoid heavy traffic and replacement of furniture and rugs for 24 hours after the final coat. Clean tools with soap and water.
Drying Time:30 minutes.
Maintenance:
Wet cleaning of the floor may be resumed after one week. For regular cleaning use Bona Cleaner. Do not products with high alkaline content as they will cause damage to the floor. in contrast to floors treated either polish, wax or similar a floor maintained with Freshen up can still be overcoated with finish.
Prior to the application of finish, the surface must be treated with the Prep System using screen P150 to remove build up from previous applicationbs of Freshen Up. Complement the screen by going in afterwards with the Bona Scrad System P220 to smooth out scratches.
Buy Bona Flooring Freshen Up
Related Media
You might also be interested in these products
- Bona R410 damp proofing Flooring Adhesive - Bona R410 is a solvent and water free component epoxy resin for damp-proofing cementitious subfloors prior to installing timber flooring. As a moisture barrier it will function when R.H. is as high as 92-100%
- Bona Traffic Wood Flooring Lacquer - A popular product, Bona Traffic is designed to withstand high volumes of flooring traffic whilst maintaining its resilient finish. Bona Traffic Anti-Slip also offers non-slip wood flooring protection - ideal for family environments.
- Bona Parquet Decor Wood Stains - Available in 8 colours, inc. neutral, Bona Stain offers an opportunity for creative freedom in changing the colour of new unfinished or old wooden floors sanded back to bare wood.
A low solvent pigment system for altering the colour of bare timber floors prior to treatment with finish or oil.
- Bona Flooring Polish Remover - Bona Flooring Polish Remover is one of our Bona products designed to remove floor polish.
- Bona Wood Flooring Prep - Bona Prep is a ready to use conditioning & preparation system designed to optimise the adhesion of Bona finishes to all types of polyurethane based floor finishes, including factory applied finishes. The use of Prep within a system ensures that the best possible level of adhesion is obtained combined with a good level of abrasion on the floor surface. This bona product is convenient and fast - just spray and buff.
- Bona Flooring Buffer Machine - Floor Buffer Machine - Originally a cleaning machine it has been adapted...
- Bona Prime Intense - A single component waterbased, 100% polyurethane primer used before coating with Bona waterborne finishes. Recommended to increase flooring protection.
- Bona Care wood Floor Cleaner - bona wood floor cleaner and spray refill, ready to use cleaning liquid for use on timber floors treated with a polyurethane finish, including pre-finished. Comes in either a 1L spray or 4L refill bottle.
- Bona Care Mop - Long 3 piece pressure lock handle
Full 360 swivelhead base allows easy manoeuvrability
Cleaning cover recomended for use
Customer Testimonials
"Great to do business - Brilliant buy / product - Many Thanks" received from our Online Store.