http://www.realoakfloors.co.uk/bepo_tools.php Bepo Tools Real Oak Floors 2006 http://realoakfloors.co.uk/media/thumbs/713_Lacquered_Rustic_Oak_Narrow_Plank.jpg http://www.realoakfloors.co.uk/bepo_tools.php http://realoakfloors.co.uk/bepo_floor_hammer.php Bepo Floor Hammer The Bepo Floor Hammer Makes fitting wooden floors stunningly simple. This hand tool combines the function of a hammer and a floor jemmy. Easy to handle and control, it does away with the hammer and gives you control when firtting wooden floors. The way to operate it is stunningly simple, put it down with one hand, hammer, lift off-ready. Due to its built-in hammering function, damages to walls, radiators etc. can be avoided. The Bepo fitting hammer has a felt base to stand solidly without damaging the floor. A gap of 4mm is sufficient to allow its use even underneath a radiator. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bepo_floor_hammer.php Wed, 26 Sep 2007 23:01:13 +0200 http://realoakfloors.co.uk/bepo_soft_slide_shoe_for_delicate_surfaces.php Bepo Soft Slide Shoe for delicate surfaces infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bepo_soft_slide_shoe_for_delicate_surfaces.php Mon, 17 Jul 2006 23:02:53 +0200 http://realoakfloors.co.uk/bepo_twist.php The Bepo Twist - The universal Joint Cutter - Cuts where no circular saw can reach. Trim doors without taking them off their hinges. Equipped with a splinter guard system. Cuts to within 1.5mm of the base and adjusts to a maximum of 28mm from the base. Ideal for shortening doors whilst in situ or undercutting door frames and skirtings etc. The body of the saw twists through 180 degrees to cut into almost any corner. Cutting is straight when the base plate follows the contour of the floor and splinter free because of its own guard. Can be used to cut vertically and for biscuit joints. The standard carbide blade is ideal for cutting wood and laminates and is nailproof. The machine works virtually dust free since the saw blade rotates in a closed casing that can be connected to a dust extractor. Tilt 180 Degrees Cutting depth 0 - 28mm Min. distance to the base min. 1,5mm to max. 28mm Adjusting depth of cuts precisely adjustable Cuts into corners to within 17mm at both ends Diameter of saw blade 115mm Splinter guard integrated into sliding plane Motor output 660 Watt Connection to extractor 27mm diameter Weight 2,5 kg infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bepo_twist.php Mon, 17 Jul 2006 23:02:53 +0200