http://www.realoakfloors.co.uk/bona_kemi_sanding_machines.php Bona Kemi Sanding Machines Real Oak Floors 2006 http://realoakfloors.co.uk/media/thumbs/713_Lacquered_Rustic_Oak_Narrow_Plank.jpg http://www.realoakfloors.co.uk/bona_kemi_sanding_machines.php http://realoakfloors.co.uk/bona_floor_cutting_machine.php Bona Cutter is a powerful cutter for planing solid wooden floors and removal of thick layers of lacquer or paint. With the Bona Cutter you increase the productivity and save both time and money when uneven, painted and lacquered floors can be planed more quickly. Through a simple adjustment of the cut depth you can easily adjust to desired depth. The compact design makes the machine simple to manoeuvre and easy to transport and it can also be disassembled and reassembled quickly and easy. The Bona Cutter has a very effective dust reception. Field of application: For planing of wood and parquet floors. Features • Unique machine for planing of solid wooden floors. • Perfect for removal of thick layers of lacquer or paint on wooden floors. • Simple adjustment of the cutting depth. • Increasing the productivity – saves time and money. • Reversible motor for 1-phase (230V) alt. 3-phase (400V). Or only 1- phase (230V). • Very efficient vacuuming. • The compact design makes the machine simple to manoeuvre and easy to transport. Technical Data Model High Speed Cutter width: 250 mm Size cutter blades: 15x15x2.5 mm (4x10 hard metal 4 sided) Motor power: 1-phase 2.2 kW 3-phase 3.0 kW Diameter Cutter: 100 mm Total weight: 67 kg Cutter speed: approx. 5000 rpm Dust discharge: < 2 mg/m³ air Model Standard Cutter width: 250 mm Size cutter steel: 250x30x3 mm (2 sharpened high speed steel) Motor power: 1-phase 2.2 kW 3-phase 3.0 kW Diameter Cutter: 100 mm Total weight: 75 kg Cutter speed: approx. 3500 rpm Dust discharge: < 2 mg/m³ air infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_floor_cutting_machine.php Sun, 09 Jul 2006 23:03:28 +0200 http://realoakfloors.co.uk/bona_flooring_buffer_machine.php The single disc sander, the buffer, the rotary machine… This type of machine has a lot of different names and maybe even more areas of use. But for the floor sander it is usually used for sanding between coats, sanding after the last belt sanding, distributing oil, polishing oiled surfaces, etc. From originally being a cleaning machine it has been adapted more for our type of work. The changes include such things as different types of mounting plates, vacuum system and power/rpm adaptation. A good, versatile machine and a true member of the Bona family. Product description • Simply constructed and simple to use. • A rotating plate inside a cast aluminium body, driven by a powerful motor. • Handles and shaft fully adjustable in height to meet the needs of all users. • One speed or two, dependent upon the task in hand. • Different mounting plates allowing the machine to be used for many different areas of use. The asymmetrical mounted motor gives the Buffer perfect balance, whilst preventing the torque from the motor causing undesired pressure on the handles. A powerful vacuum, positioned on the shaft, removes dust very efficiently. A perfect balance and ergonomically correct working position. Almost anybody can use a Buffer after a couple of minutes’ practice. Areas of use For sanding wooden floors, cutting back between coats, sand and recoat, distributing and polishing floor oil, and cleaning. Features • One speed high power for tough sanding. • Two speed for light sanding and oil jobs. • Easily detached vacuum unit. • A tight sealing ring between machine and floor. • Strong fold-away carrying handle in the front. • Continuously adjustable handles. • Asymmetrical placed motor for perfect balance. • Sturdy transport wheels. • A variation of different ‘quick-change’ mounting plates for different jobs. Bona Buffer • 6-terminal motor with reinforced torque • 1600 W/230V • 120 rpm • 440 mm wide • 380 mm mounting plate • 330 mm high • 12,5 m cable • 33 kg Bona Buffer Duo • Double winded two-in-one motor • 1200 – 1500 W/230V • 190 – 380 rpm/min • 440 mm wide • 380 mm mounting plate • 330 mm high • 12,5 m cable • 35.5 kg infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_buffer_machine.php Sun, 09 Jul 2006 23:03:28 +0200 http://realoakfloors.co.uk/bona_flooring_edge_sander.php The Bona mini Edge sander is an extremely strong edge sander although it has a very light weight. It can be fitted with holed-discs or Velcro discs. It also picks up dust better than any other edge sander on the market. For the contractor’s convenience the Bona Edge has illumination and is also portable. Field of application: For edge sanding of all kinds of wooden floors and parquet floors. Features • Light weight • Powerful motor • High sanding ability • Very maneuverable • Efficient vacuuming • Both for discs with holes and velcro discs Technical Data Disc diameter: 178 mm Motor power: 1-phase 2.0 kW Total weight: 15 kg Length sanding arm: 220 mm alt. 330 mm Disc speed: 3000 rpm Dust discharge: < 1 mg /m³ air infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_edge_sander.php Sun, 09 Jul 2006 23:03:28 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_belts.php Belts are used in most modern sanding machines. The joint is formed either by tape or an overlapped bond. The overlapping type is used on finer grits to avoid the effects of differences in height. The choice of grit quality and backing is determined by the sanding requirements. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_belts.php Mon, 17 Jul 2006 23:03:35 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_disc.php Bona Sia Discs are used with edge sanders, buffers, single disc, Trio and Quad machines. Available both with and without a centre hole and with Sia fast backing for quick changes or double sided for effective andamp; efficient sanding. Available in the following diameters: 150mm 178mm 200mm 407mm (Double discs) infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_disc.php Mon, 17 Jul 2006 23:03:35 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_machine.php Being the kid brother of the Bona Belt, the Bona Flexidrum has some interesting features itself. One of them is its unique drum construction with sections that can be replaced easily if damaged. The Bona Flexidrum is very easy to control and gives excellent results on most floors. Field of application: For sanding all kinds of wooden floors and parquet floors. Features • A unique drum construction. Patented. • Simpler and cheaper drum renovation. • Better sanding result. • Simple paper exchange. • Excellent dust reception. • Easy to manoeuvre and to transport. Technical Data Drum width: 200 alt. 250 mm Abrasive belt: 200 x 551 mm alt. 250 x 551 mm Motor power: 1-phase 1.8 kW alt 2.2 kW Total weight: 63 kg Drum speed: 2100 rpm Dust discharge: < 2 mg /m³ air For further technical data please see the machine manual. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_machine.php Sun, 09 Jul 2006 23:03:29 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_roll.php Rolls of abrasives are cut to fit drum sanders and are held in place by the machine's drum clamping mechanism. Available in 203mm and 305mm, all rolls are 25 metres long. The 203mm rolls consist of Grit 16 to 50 with silicon carbide backing cloth and Grit 60 to 150 with aluminium oxide backing cloth. The 305mm rolls consist of Grit 16 to 50 with silicon carbide backing cloth and Grits 60 to 120 with aluminium backing cloth. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_roll.php Mon, 17 Jul 2006 23:03:35 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_scrad.php The Scrad System is suitable for extremely fine sanding. The Scrad System consists of a thin (10mm) Pad with a triangular shaped piece of sandpaper attached. it is perfect for keying a surface before overcoating and does not clog. Where to use it? Final finishing of bare wood. To reduce grain raising / give a well-bodied finish and an even level of sanding across the whole floor. Between coats of lacquer – to cut back raised grain / remove dust etc. In the finish, if necessary. To prepare refinished / previously finished floors prior to lacquer application. WHY? Extremely smooth finish Minimal risk of visible sanding marks Very cost effective in comparisons to sanding screens Minimal creation of dust. Coverage Scrad Pad – 200 – 399 M squared Scrad Wing – 25 - 50 M squared Coverage is depending upon both the substrate and the application Key Points Should not be used for the removal of lacquer of sanding floors to bare wood but for the final preparation of 120no. Grade sanded floors or lacquered surfaces. For the best results the scrad sould be used both along and across the floor during each stage of the preparation of the floor. For the optimum performance the scrad pads must be cleaned regularly and the wings replaced frequently. Prior to the application of the Bona Lacquer the floor must be thoroughly cleaned. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_scrad.php Sun, 23 Jul 2006 23:04:48 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_screen.php Screens are used with buffing machines when an extra fine sanding result is required and removing grain raising after the first coat when the finish is absolutely dry. The following sizes are available (diameter): 330mm in grit sizes P60-P120 407mm in grit sizes P60-P220 infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_screen.php Sun, 29 Jan 2006 23:02:47 +0100 http://realoakfloors.co.uk/bona_industrial_floor_edger.php Bona industrial edge sanders. Make it fast! Bona Edge is the most powerful edge sander on the market – the best way to make your working day easier. Edge sanding is a hard job, since you have to crouch or kneel, but with Bona Edge you can make the job a lot faster. Bona Edge now features the same awardwinning ergonomic design as Mini Edge. So if you want a more comfortable working day, try out Bona Edge. Your body will definitely thank you at the end of the day.The Bona Edge is an extremely strong edge sander however it is surprisingly lightweight. It can be fitted with holediscs or Velcro discs. It also picks up dust better than any other edge sander on the market. For the contractor's convenience the Bona Edge has a built in light and is also portable. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_industrial_floor_edger.php Sun, 09 Jul 2006 23:03:29 +0200 http://realoakfloors.co.uk/bona_industrial_floor_sander.php The Bona Belt sanding machine that makes big jobs seem small. It is a powerful belt or drum sander in one with a unique construction with simple change of drums. The compact design makes the machine simple to manoeuvre and easy to transport and it can also be disassembled and reassembled quickly and easy. The Bona Belt has a very efficient vacuuming. The Bona Belt comes in different versions, according to your needs – that’s freedom of choice. Field of application: For sanding all kinds of wooden floors and parquet floors. Features • Unique construction with a simple change of drums with either a 200 mm or a 250 mm width. • Ergonomic designed handle facilitates raising and lowering of the drum. • Reversible motor for 1-phase (230V) alt. 3-phase (400V). Or only 1-phase (230V). • Large front and side covers make the drum and tension roller easy to reach. • Very efficient vacuuming. • The compact design makes the machine simple to manoeuvre and easy to transport. Technical Data Drum width: 200 alt. 250 mm Sanding belt size: 200 x 750 mm alt. 250 x 750 mm Motor power: 1-phase 2.2 kW 3-phase 3.0 kW Total weight: 74 kg Drum revolutions: 1750 rpm Dust discharge: < 2 mg / m³ air infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_industrial_floor_sander.php Sun, 09 Jul 2006 23:03:30 +0200 http://realoakfloors.co.uk/bona_floor_cleaning_pads.php Cleaning padsFor cleaning and buffing lacquered or oiled floors. Colours available: Red, Green, Tan and White 407mm. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_floor_cleaning_pads.php Thu, 27 Jul 2006 23:06:58 +0200 http://realoakfloors.co.uk/bona_flooring_sanding_belts_1.php bona sia Belts are used in most modern sanding machines. The joint is formed either by tape or an overlapped bond. The overlapping type is used on finer grits to avoid the effects of differences in height. The choice of grit quality and backing is determined by the sanding requirements. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_flooring_sanding_belts_1.php Mon, 17 Jul 2006 23:03:36 +0200 http://realoakfloors.co.uk/bona_edge_transport_box.php Bona Edge Transport Box infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_edge_transport_box.php Sun, 23 Sep 2007 23:07:06 +0200 http://realoakfloors.co.uk/bona_extra_weights.php Bona Extra Weights for Belt andamp; Flexydrum Sander infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_extra_weights.php Sun, 09 Jul 2006 23:03:36 +0200 http://realoakfloors.co.uk/bona_new_edge_dust_bag.php Bona Dust Bag for New Edge andamp; Mini Edge Machines Part No. 992002 infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_new_edge_dust_bag.php Sun, 09 Jul 2006 23:03:37 +0200 http://realoakfloors.co.uk/bona_old_edge_dust.php Bona Dust Bag for Old Edge Machines Part No. 992001 infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_old_edge_dust.php Wed, 26 Sep 2007 23:05:38 +0200 http://realoakfloors.co.uk/bona_vac_dust_collector.php Bona Vac Dust Free Collector The Bona Dust Care Single is more than a vacuum cleaner. It is a revolution for your working environment. Use it for sanding without dust. Thanks to the patented two-step cyclonic separation and the unique filter design, dust is collected safely within the Bona Dust Care Single. It’s portable so you can take it anywhere on the job site and connect up the hose to your sanding machine. Your working environment will be cleaner and you can work faster. Your customers will also be happier and you can charge them more for taking care of dust. Bona has solved one of the flooring contractor’s biggest problems dust Improved profitability. Customers are willing to pay more for dust-free sanding so you can charge more for this service. Healthier working conditions in compliance with new regulations coming in the future. Totally sealed system thanks to a unique seamless bag system, no dust can escape when changing the dust bag. Higher standards and status for flooring contractors. You are able to attract new customers who are more demanding or more sensitive about dust. Greater customer satisfaction because of sanding without dust and reduced odour. Exclusive design from Bona, a unique separation process makes this no ordinary vacuum cleaner. Ergonomic designed to be easy to use and transport. Superb end-result after applying finish because no dust is left on the surface of the bare wood. Made for professional use robust, high quality machine for flooring contractors. Dust Care 8300 (zirconia mix abrasives) The cutting edge dust fighter The world’s first antistatic abrasives for wooden floors.Our Dust Care System isn’t complete without our new abrasives, developed together with the company sia Abrasives. With our new technology the dust will release from the abrasive and the floor directly into the Dust Care unit. This improves your working environment and makes sanding much more effective as well. And of course Dust Care 8300 has the same efficient and long-lasting sanding properties as before. An aggressive cut, but mild enough not to damage the floor. Dust Care 8300 is the perfect complement to our machines and the Dust Care units infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/bona_vac_dust_collector.php Fri, 01 Dec 2006 23:06:03 +0100