http://www.realoakfloors.co.uk/trip_trap_oils_and_lacquers.php Woca oils are a range of wood finishing products for flooring. Treatment oils designed to maintain and clean your hardwood or engineered wood flooring. Distributed by Real Oak Floors. Maintaining your Wood Floor with Woca From nature's hand, wood is equipped with special properties that make it a unique product to place in your home. Not only is it flexible and functional, but is also extremely hard wearing and water resistant - if properly looked after. Woca Wood Care products are designed to keep wood floors looking their best for years to come. Who would invest in quality wood work and then not look after it properly? Woca Oiled Solid Wood Floors First and foremost, Woca wood care products are natural, containing no dangerous materials. This makes Woca safe for use in environments where children or pets may traverse the floor. Also, with regular use floors treated with Woca products are protected from dirt and water spillage and become anti-slip surfaces. However, the unique properties of the Woca system leaves no film on top of the wood, allowing you to enjoy your floor as its meant to be. This unobstrusive system makes repair easy as no residues are left sitting on top of the floor. Woca Products Are: VOC FREE (Free from Volatile Organic Compounds) Building Biological Approved (IBR Rosenheim, DE) DIN-NORM: 53-160 (Licking and Swetting tested) EN 71-3: Approved for Childrens Play Toys Woca Wood Care Products Woca wood care system uses only natural products no perfumes or artificial colour or preservatives. This assures the property owner that no toxic substances are transferred, woca provides three basic systems. Priming products, basic wood finishing and maintenance and cleaning. Priming products consist of softwood lye master lye. Woca Priming Products Prime your wooden floor before applying the oil or lacquer of your choice to help prevent the natural yellowing process of wood. Woca have a selection of products to cater for all softwood and hardwood floors including Woca Wood Lye and Woca Master Lye. Woca Finishing Products Finish your wooden flooring with the oil or lacquer of your choice. Protective Woca colour oils include a selection of colours such as Black, Grey, White, Natural and many different shades of Brown. Woca Maintenance and Cleaning Products Woca Maintenance and cleaning products cover everything you need for your stone, tiled and wooden flooring. Woca Natural Soap and Woca Master Soap are ideal for the regular cleaning of wooden floors while Woca maintenance oil and paste freshens and maintains the wood. We are an authorised distributor of all Woca products, if there are any Woca products such as danish oil not listed that you are interested in contact us for the latest prices and availability. Real Oak Floors 2006 http://realoakfloors.co.uk/media/thumbs/713_Lacquered_Rustic_Oak_Narrow_Plank.jpg http://www.realoakfloors.co.uk/trip_trap_oils_and_lacquers.php http://realoakfloors.co.uk/woca_maintenance_box_for_lacquered_floors.php Woca Maintenance Box For Lacquered Floors Lacquered floors need regular maintenance and cleaning. This Woca Maintenance Box for lacquered floors contains everything you need including 1 litre lacquer care, 1 litre wood cleaner, 1 litre lacquer soap and 2 cloths. Lacquer Care can be used on all lacquered surfaces and is suitable for regular maintenance. Lacquer care strengthens and protects the lacquered surface leaving it more resistant to wear and scratches. Lacquer Soap is suitable for regular cleaning of lacquered or painted surfaces including vinyl, tiles, and laminate. Box Contents: 1 Litre Lacquer Care 1 Litre Wood Cleaner 1 Litre Lacquer Soap 2 Cloths Woca Maintenance Box For Lacquered Floors Usage Instructions infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_maintenance_box_for_lacquered_floors.php Mon, 08 Sep 2008 23:01:53 +0200 http://realoakfloors.co.uk/woca_maintenance_box_for_oiled_floors_with_maintenance_oil.php Woca Maintenance Box For Oiled Floors With Maintenance Oil Woca Maintenance Box For Oiled Floors With Maintenance Oil includes everything you need to clean your wooden flooring including 1 litre maintenance oil, 1 litre wood cleaner, 1 litre natural soap, pad and cloth. Wooden floors should be maintained regularly for a longer lasting, fresher looking floor. This maintenance box is available with either natural or white maintenance oil which can be used on all oiled wooden surfaces. The included natural soap nourishes the wood and closes pores which protects against dirt and liquid penetration. Box Contents. 1 Litre Maintenance Oil 1 Litre Wood Cleaner 1 Litre Natural Soap 1 Pad 1 Cloth Woca Maintenance Box For Oiled Floors With Maintenance Oil Usage Instructions infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_maintenance_box_for_oiled_floors_with_maintenance_oil.php Fri, 25 Jan 2008 23:06:58 +0100 http://realoakfloors.co.uk/woca_maintenance_box_for_uv_oiled_floors_with_maintenance_paste.php Woca Maintenance Box For UV Oiled Floors With Maintenance Paste UV oiled floors should be cleaned and maintained regularly. The Woca Maintenance Box For UV Oiled Floors With Maintenance Paste includes everything you need to clean your UV oiled wooden flooring. Included in this box is 400ml maintenance paste, 1 litre wood cleaner, 1 litre natural soap, 1 pad and 1 cloth. Maintenance paste refreshes and maintains your UV oiled wooden flooring while the included Natural Soap nourishes the wood closing pores which protects against liquid and dirt penetrating the surface. Box contents: 400ml Maintenance Paste 1 Litre Wood Cleaner 1 Litre Natural Soap 1 Pad 1 Cloth Woca Maintenance Box For UV Oiled Floors With Maintenance Paste Usage Instructions infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_maintenance_box_for_uv_oiled_floors_with_maintenance_paste.php Mon, 08 Sep 2008 23:01:54 +0200 http://realoakfloors.co.uk/woca_worktop_maintenance_kit.php Woca Worktop Maintenance Kit - Natural and White Woca worktop maintenance kit contains everything you need to maintain and revitalise your wooden worktops including woca cleaner, woca worktop Oil and paint brush and cloth. Woca worktop oil is developed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water and dirt repellent. Use Worktop Oil, Natural, on dark wood species such as mahogany, merbau, teak and cherry, etc. It gives the wood a mellow, golden colour. Use Worktop Oil, white, on light wood species such as ash, oak, beech, maple, birch and pine, to give the wood a beautiful, light colour. Kit Contains 1 x 0.75L Worktop Oil (Natural or White) 1 x 1L Wood Cleaner 1 x Paint brush 1 x Cloth infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_worktop_maintenance_kit.php Mon, 30 Aug 2010 23:00:57 +0200 http://realoakfloors.co.uk/trip_trap_maintenance_oil.php Woca Maintenance Oil Woca Oils are available in Natural and White 2.5 litres. For buffing and maintaining oil-treated wood floors. Suitable for both hand and machine application. Maintain an oiled wooden floor by using these natural Woca Oils from Denmark after preparation by wet cleaning with intensive wood cleaner. Sanding or scraping is not normally required. Only a small quantity of oil is needed to smooth loose wood fibres and repair any wear to the protective finish. Hence, this oil has a low viscosity to allow a very thin application. Maintenance is necessary when the floor has become worn. Maintenance Oil is also used during the commercial application of Master Oil, or to thin Master or Colour Oil for manual application. Use White Maintenance Oil when re-oiling white oiled floors. If a white oiled floor has been damaged or sanded then touch-up the area with Colour Oil 188, extra white. Factory white-oiled floors can often be whiter than your repaired spot. If so do not repair with oil, but White Soap concentrate. Coverage 30-40m/litre Usage Guide Before a new floor is taken into use it is recommended to buff it – both industrially oiled floors and residentially oiled floors. The final buffing provides a hard-wearing surface and may take place either by hand or with machine. Oiled floors should be maintened regularly – normally once a year, but more often when it comes to floors exposed to extremely hard wear. Clean the floor with 125 ml Wood Cleaner mixed into 5l water. Leave the floor to dry for at least 8 hours. The floor must be completely dry. Shake the container carefully. Apply approx. 100 ml oil per 4 m squared with pad, paint roller, cotton cloth or use polishing machine for large surfaces. It is important that the Maintenance Oil is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform. Wipe the floor with clean, dry cotton cloths before proceeding with the next section of floor to be finished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections untill the floor has been finished. When polished with polishing machine the floor will be pre-hardened after approx. 4 hours at 20° C and may cautiously be taken into use. Manually polished floors may be taken into use after 24 hours. The surface is fully hardened after 24 hours. Do not expose the floor to water during the hardening time. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_maintenance_oil.php Mon, 08 Sep 2008 23:01:55 +0200 http://realoakfloors.co.uk/trip_trap_master_oil.php Woca Master Oil Woca Master Oil For initial oiling of all types of wood flooring. White is generally used for light wood species, and Natural is generally used for darker woods. Usage Guide Master Oil is ideal for large areas. It is recommendable to use a polishing machine. The Master Oil Natural is mainly used on dark wood species and enhances the natural warm glow of the wood whereas light wood species are often finished with Master Oil White which maintains and protects the natural light colour. The unfinished woodwork should be freshly sanded with grit 100-120. Clean with 125 ml Wood Cleaner mixed with 5 l water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended wood moisture max. 12 %. The oiling is made at min. 18° C. Shake oil container well before and during use. Apply the oil with a short-haired paintroller in an even coat onto approx. 5-10 m2 of floor. Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil. Excess oil is removed or scraped onto next section of floor to be finished. The area is now polished with a beige polishing pad under floor machine until the area appears saturated. The floor should not appear wet and no excess oil should be left on the surface after polishing. Continue in sections until the whole floor has been finished. After 6-8 hours or when dry enough to walk on the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100ml Master Oil to 15 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface. After 12 hours the floor may be used with caution. The surface is fully hardened after 36-48 hours. Do not expose the floor to water during the hardening time. Coverage10-12m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_master_oil.php Sun, 15 Mar 2009 23:02:30 +0100 http://realoakfloors.co.uk/trip_trap_danish_colour_oils.php Woca Danish Colour Oils 2.5 litres. For preparatory, staining and oil treatment of wooden floors. Available in 14 colours: An oil finish with wood floor oil may be done either manually or with a polishing machine, it is recommended to use a polishing machine for areas larger than fifteen metres. The wood floor oil natural is mainly used on dark wood species and enhances the natural warm glow of the wood where as light wood species are often finished with wood floor oil white which maintains and protects the natural light colour. How to colour oil your wood flooring The unfinished wood work should be freshly sanded with grit 120 clean with 125ml wood cleaner mixed with 5 litre of water.The floor must be completely dry and free from dirt and grease before the oil application,Recommended wood moisture max.12% the oiling is made at min 18 celsius. Shake oil container well before use, apply the oil with ashort haired paint roller in an even coat onto approx 5 to 10metres of floor. leave the oil to be absorbed for 15 minutes, if dry spots appear, apply more oil. Excess oil is removed or scraped onto next section of floor to be finished.The area is now polished witgh a beige polishing pad,until the area becomes saturated.The floor should not appear wet and there should not be any excess oil left on the surface after polishing,continue in sections until the whole floor has been finished. After 6-8hours or when dry enough to walk on the floor should be buffed with white polishing pad.If a silk mat surface is required, the finished floor may be buffed with 100ml wood floor oil to 15metres of floor,this is done after the pre-hardening time and the oil must be polished carefully into the floor, remove any excess oil from the surface,after 24 hours the floor may be used with caution.The surface is fully hardened after 4-7 days, do not expose the floor to water during the hardening time. PLEASE NOTE: The Cherry Red colour oil and the Tea Chest Brown are being discontinued and will only be available whilst stocks last - please call to check availability. 101 - Light Brown 102 - Brazil Brown 104 - Cherry Red Brown 105 - Tea chest brown 106 - Rhode Island Brown 114 - Castle grey 118 - Extra White 119 - Walnut 120 - Black 314 - Extra Grey 340 - Bordeaux *New!* 341 - Cream *New!* 342 - Brandy *New!* 349 - Antik *New!* To see a full colour swatch of the stains available (Swatches used were oak) please click here Coverage12m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_danish_colour_oils.php Mon, 22 Jun 2009 23:00:22 +0200 http://realoakfloors.co.uk/woca_outdoor_wood_oil.php Woca Outdoor Wood Oil Woca outdoor wood oil protects outdoor wood work from UV rays and weather providing a hard wearing and water resistant surface. It is commonly used on but not limited to benches, windows and fences and is compatible with all wood species. Non pressure-treated softwood (except from red cedar) must be primed with Woca Primer before oiling. Coverage: 15 - 20 m2 per litre. Available Colours Primer Natural Colour- 429 Red Brown Colour - 430 Hazel Colour - 431 Olive Colour - 432 Oak Colour - 433 Cherry Colour - 434 Pine Colour - 435 Spruce Colour - 436 Larch Colour - 437 Silver Colour - 440 White Colour - 401 infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_outdoor_wood_oil.php Mon, 16 Mar 2009 23:02:10 +0100 http://realoakfloors.co.uk/trip_trap_softwood_lye.php Woca Softwood Lye Woca Softwood Lye. 1L, 2.5L and 5L.For priming of pine, spruce, and pitch pine. Prevents the natural yellowing process of the wood and preserves its original light colour. The wood must be finished with oil or soap afterwards. How to use The unfinished woodwork must be well sanded and cleaned dry before application of lye. Clean with 125ml wood cleaner mixed with 5 litres of water, shake the container well and pour the lye into a plastic bucket and stir regularly during appliication to get a uniform finish. It is important that no white pigments are left back in the container, stir the lye regularly afterwards. Apply an even coat of the lye with a nylon brush lengthwise the wood grain, use at least one litre of lye per ten metres square. On vertical wood work apply the lye from top to bottom, tools can be cleaned in water. Lye primed wood floors may after approximately one hour be cleaned with wood cleaner. Alternatively the the lye primed surface may after 1 hour be polished with a green or beige pad under the polishing machine and finally vacuum cleaned. After a drying time of eight hours at 20 centigrde the wood must be completely dry, the wood floor may be oiled with wood floor oil, colour oil, or high solid master oil or soaped with natural soap. Coverage10m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_softwood_lye.php Mon, 08 Sep 2008 23:01:57 +0200 http://realoakfloors.co.uk/trip_trap_hardwood_lye.php Woca Wood Lye - White and Grey Woca wood Lye for the lye priming of softwood and light hardwood.Wood lye can be used anywhere indoors for new or freshly sanded solid softwood or light hardwood, Beech, Ash, Birch, Maple, Hevea. Wood lye bleaches the wood preventing the yellowing process. Usage Guide Wood Lye bleeches solid wood floors and engineered floors of solid wood and is especially used for beech, oak, birch, maple, hevea and other types of softwood or light hardwood. The unfinished woodwork must be well sanded, clean and dry before application of lye. Clean with 125 ml Wood Cleaner mixed with 5 l water. Shake the container well and pour the lye into a plastic bucket and stir regularly during application to get a uniform finish. Stir the lye regularly during the work. Apply the lye undiluted with a nylon brush in an even coat on the floor lengthwise. Use at least 1 l of lye per 10 m2. On vertically mounted woodwork, apply from top to bottom. Rinse work tools clean in water. When woodwork is dry, remove any visible lime pigments from the surface. Possibly clean with Wood Cleaner or polish with green pad under floor machine and subsequently vacuum clean the floor. Lye primed wood floor may after a drying time of approx. 8 hours at 20° C (the wood must be completely dry) be oiled with Wood Floor Oil, Master Oil, Colour Oil or High Solid Master Oil or soaped with Natural Soap. The surface may also be finished with Wood Floor Lacquer or Oil Lacquer. 2.5 litres. For giving a lighter shade to solid hardwood, e.g. beech and ash. After being treated with hardwood lye, the wood must be treated with oil. Coverage10m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_hardwood_lye.php Mon, 16 Mar 2009 23:05:17 +0100 http://realoakfloors.co.uk/trip_trap_master_soap.php Woca Master Soap Woca Master Soap. For frequent cleaning of wood surfaces. Master soap is useful for cleaning oiled or waxed timber as well as vinyl, wood floor stone, and pvc surfaces. A wood floor which is cleaned with master soap should be maintained with woca natural soap or maintenance oil or paste. How to use Mix 250 ml Master Soap with 10 l of warm water for the daily cleaning. Clean the floor lenghtwise of the wood grain. It is recommended to use two buckets – one with the soap solution and one with rinse water. Use a cleaning machine if necessary. It is important that no water is left on the floor. Use as little water as possibly to obtain a satisfactory result. Particularly dirty floors/stains may be cleaned with Wood Cleaner. Coverage320-400m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_master_soap.php Mon, 08 Sep 2008 23:01:59 +0200 http://realoakfloors.co.uk/trip_trap_soap_-_natural_and_white.php Woca Soap - Natural And White Woca natural soap closes the pores of the wood and protects against dirt and penetration of liquids. Woca Natural Soap is used for cleaning wood surfaces and for the basic soaping of softwood floors, in Natural or White -1 litre 2.5 litres and 5 litres Natural Soap. Available in Natural or White Soap contains a high degree of solid matter. For maintaining and cleaning lye-treated, lacquered and oiled wood floors. Coverage400m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_soap_-_natural_and_white.php Mon, 16 Mar 2009 23:02:49 +0100 http://realoakfloors.co.uk/trip_trap_wood_floor_cleaner.php Woca Wood Floor Cleaner Woca Wood Floor Cleaner. For basic cleaning of all types of wood surfaces, irrespective of the basic finish. Wood floor cleaner may be used for the cleaning of lye treated, soaped, oiled, waxed and lacquered surfaces, furthermore it is well suited for cleaning of unfinished walls and ceiling panels, furniture etc. Removes grease, dirt and soap residues. Woca wood cleaner is available in the container sizes of 1L and 2.5L. Tools 2 plastic buckets, mop doodlebug, floor cloth or the like. How To Use 150ml wood cleaner is mixed into 5 litre of lukewarm water,leave solution on surface to dissolve dirt if neccesary. Scrub with brush or pad manually or with floor machine if very dirty.Wipe clean with a mop or cloth,always wipe a second time to minimize the exposure to water of the surface. Repeat if the floor is extremely dirty. TIP: always work with two buckets,one with wood cleanermix with water and one with rinse clear water. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_wood_floor_cleaner.php Mon, 08 Sep 2008 23:02:01 +0200 http://realoakfloors.co.uk/cleaners_box.php Woca Cleaners Box The Woca Cleaner's Box contains Natural Soap, Intensive Wood Cleaner and Maintenance oil. Also included is a cleaning cloth. Not only is it a convenient storage format, but it also shows how simple to clean and durable the floor will be making it a complete trip trap maintenance kit. Assuming a floor size of 25m squared the 1L sizes will last as follows: Natural Soap 40 damp cleans, Intensive wood cleaner 10 wet cleans, Maintenance oil 2 re-oilings. Refer to the individual products to see usage and MSDS information. It is used as follows: The NATURAL SOAP should be added to warm water for every day cleaning of wood The MAINTENANCE OIL should be kept on one side for two purposes - a. touching up of minor scratches and b. for re-oiling an entire area as part of wood maintenance The INTENSIVE WOOD CLEANER should be used to give wood a thorough clean before the use of Maintenance oil. ie. it removes remains of soap infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/cleaners_box.php Mon, 08 Sep 2008 23:02:01 +0200 http://realoakfloors.co.uk/woca_wood_floor_oil.php Woca Wood Floor Oil - Natural and White Woca wood floor oil give a good finish for wood flooring. It can be applied either by hand or by machine on all unfinished wood flooring to provide a strong dirt and water resistant surface and is available in white or natural. Available in Wood Floor Oil is available in the container sizes of 1, 2.5, 5 and 10 litre containers (10 litre only in natural) and in the colours natural and white. Tools Either polishing machine or doodlebug (cleaning pad) for the manual finishing. Paint roller and cotton cloths. The unfinished woodwork should be freshly sanded with grit 120. Clean with 125 ml Wood Cleaner mixed with 5 l water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended wood moisture max. 12%. The oiling is made at min. 18° C. Shake oil container well before and during use. Apply the oil with a short-haired paint roller in an even coat onto approx. 5-10 m2 of floor. Leave the oil to be absorbed for 15 minutes. If dry spots appear, apply more oil. Excess oil is removed or scraped onto next section of floor to be finished. The area is now polished with a beige polishing pad under doodle-bug or with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections until the whole floor has been finished. After 8-12 hours or when dry enough to walk on the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100 ml Wood Floor Oil to 15 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface. After 24 hours the floor may be used with caution. The surface is fully hardened after 4-7 days. Do not expose the floor to water during the hardening time. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_wood_floor_oil.php Tue, 17 Mar 2009 23:06:17 +0100 http://realoakfloors.co.uk/trip_trap_stain_remover.php Woca Stain Remover Woca Stain remover suitable for all types of surfaces and finishes. Dissolves grease, red wine, blood, and coffee stains etc effectively. Before using spot remover it is advisable to make a small test at a area not in view, spray spot remover evenly on the stain directly from the cannister. Leave the spot remover to dissolve the stain for ten to twenty minutes. Then scrub with a brush until the stain dissapears. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_stain_remover.php Mon, 08 Sep 2008 23:02:02 +0200 http://realoakfloors.co.uk/trip_trap_worktop_oil_natural.php Woca Worktop Oil Natural 0.75L Worktop Oil is developed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water and dirt repellent. Use Worktop Oil, Natural, on dark wood species such as mahogany, merbau, oak, teak and cherry, etc. It gives the wood a mellow, golden colour. Use Worktop Oil, white, on light wood species such as ash, oak, beech, maple, birch and pine, to give the wood a beautiful, light colour. Using worktop oil to treat your oak worktops Worktop Oil is developed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface highly water and dirt repellent. Use Worktop Oil, Natural, on dark wood species such as mahogany, merbau, teak and cherry, etc. It gives the wood a mellow, golden colour. Use Worktop Oil, white, on light wood species such as ash, oak, beech, maple, birch and pine, to give the wood a beautiful, light colour. Tools Brush, roller or lint-free cotton cloths. Possibly oil-wetted -sanding paper 320-400 grit and white polishing pad. 1. Clean If the surface is particularly smooth, sand the surface with sandpaper grit 180. Make sure the wood is dry and avoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours. 2. Apply Stir the oil thoroughly before use. Use a paintbrush to apply a suitable amount of oil in an even, adequate coat. 3. Wet sanding Wait approx. 20-30 minutes at 20°C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet lengthwise of the wood grain with sandpaper grit 320-400. 4. Wipe Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface. 5. Polish Polish the wood carefully using a white polishing pad, which ensures a harder wearing surface. Repeat the treatment on highly absorbent surfaces.The oil is thoroughly hardened after 24 hours at 20°C. Do not let the tabletop become wet during the hardening process. 6. Maintenance Use Worktop Oil or Oil Mousse to maintain the tabletop four times a year, or as often as necessary. Before starting the maintenance procedure, clean the worktop using Wood Cleaner, and let the surface dry for at least 8 hours. 7. Technical info Storage: Cool, but frost-proof. Disposal: Empty containers and residues to be disposed of according to local regulations. Declaration: Cobaltoctoat. VOC: 414 g/l. Sub-category of the product: i. Permit limits of the product: 600 g/l. (01.01.2007)/500 g/l. (2010). Consumption: 12-15 m2/l. 8. Please notice!! Risk of self-ignition: Due to the risk of self-ignition it is important that oil wetted cloths are soaked in water and disposed of in a tightly closed container after use. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_worktop_oil_natural.php Mon, 08 Sep 2008 23:02:04 +0200 http://realoakfloors.co.uk/trip_trap_decking_cleaner.php Woca Decking Cleaner Trip Trap Decking Cleaner 2.5 litres. Effective cleaning of old wooden deckings and patios. Removes green growth and loosens dirt. A final treatment with Decking Oil is required. Usage Guide Soak the wood with plenty of water. If possible use a garden hose. Mix Decking Cleaner with water in the ratio 1:2 and apply it with stiff brush. By extreme dirt the Decking Cleaner may be used undiluted. Scrub the soaked wood lengthwise the wood grain till the wood appears clean. Repeat the cleaning if necessary. Clean tools in water. Leave the surface to dry for 3-4 days. Wash down carefully with water and remove any loose particles with a stiff brush. Leave the wood to dry for approx. 24 hours. The wood must be completely dry before oil treatment. Remove fibre rising with sandpaper. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_decking_cleaner.php Mon, 08 Sep 2008 23:02:05 +0200 http://realoakfloors.co.uk/trip_trap_decking_oil.php Woca Decking Oil For new and old, newly cleaned wooden deckings. Protects the wood against UV-rays and provides the wood with a hard-wearing, water-resistant surface. Available in natural and redbrown (use only natural for pressure-treated wood). How to oil your decking Treat new decking timber with oil before use. Clean thoroughly before starting the treatment. For old decks, clean before treatment using Decking Cleaner, then let the wood dry for approximately 24 hours. Make sure the wood is completely clean and dry. Sand down any wood fibres with fine sandpaper. Perform the treatment in dry weather only. Avoid direct sunlight and high temperatures. Stir the oil thoroughly before use. Apply the oil evenly using a brush or paint roller. Treat the crosscut ends first. Remove any excess oil with lean cotton cloths after no more than 20 minutes. Take particular care to remove excess oil from joints and grooves. If the surface does not appear to be saturated with oil, repeat the treatment. It takes 24 to 48 hours for the oil to harden completely, depending on weather conditions and outdoor temperature. The wood must not be exposed to water during this period. Consumption Approx. 1l per up to 10-13m squared infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_decking_oil.php Tue, 17 Mar 2009 23:07:17 +0100 http://realoakfloors.co.uk/trip_trap_garden_furniture_oil_natural.php Woca Garden Furniture Oil Natural Woca garden Furniture out door Oil. For new and newly cleaned garden furniture. Protects the wood against UV-rays and provides the wood with a hard-wearing water-repellent surface. Available in Natural, Teak, and Nyatoh/Meranti. Oiling your garden furniture The furniture must be completely clean before oiling. New furniture may be cleaned with Wood Quick and old furniture either with Wood Quick or with the more intensive Deep Cleaner A andamp; B. Leave the furniture to dry for approx. 24 hours. Remove wood chips or rough fibres with fine sandpaper. Stir the oil carefully before application. Apply the oil with brush or cotton cloth in an even saturating coat. Start with the end grain. Application only in dry weather. Avoid heat and direct sunlight. Carefully remove excess oil after max. 20 min. with clean lint-free cotton cloths. Draw special attention to joints and cracks. Repeat the process in case the wood does not appear saturated. Carefully polish with a polishing pad to achieve an especially hard-wearing surface. The oil is complete ly hardened after 24–48 hours depending on weather and temperature. Do not expose the furniture to water during hardening time. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_garden_furniture_oil_natural.php Tue, 17 Mar 2009 23:07:17 +0100 http://realoakfloors.co.uk/woca_maintenance_paste_natural_trip_trap.php Woca Maintenance Paste Natural or White Before a new floor is taken into use it is recommended to buff it – both industrially oiled floors and on site oiled floors. The final buffing gives a hard-wearing surface and may take place either by hand or with machine. Oiled floors should be maintened regularly – normally once a year, but more often when it comes to floors exposed to extremely hard wear. The maintenance may be done locally. Usage Instructions Clean the floor with 125ml woca wood cleaner mixed into five litres of water. Leave the floor to dry for at least eight hours. Apply a thin coat of maintenance paste onto one to two metres of flooring,with a white polishing pad or cotton cloth.Use floor machine on large areas. Make sure that the maintenance paste is polished uniformly into the wood.continue buffing until wood appears silk matt. If a very matt finish is required, use cotton cloths under buffing machine. No heavy traffic for four hours and no water on surface for fourty eight hours. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_maintenance_paste_natural_trip_trap.php Mon, 08 Sep 2008 23:02:10 +0200 http://realoakfloors.co.uk/trip_trap_solvent.php Woca Solvent Used for the dilution of Woca oil products and the cleaning of tools. Iso Parrafin is the category for the cleanest types of solvents available. These are used by Woca to achieve a remarkable high standard of classification. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_solvent.php Mon, 08 Sep 2008 23:02:11 +0200 http://realoakfloors.co.uk/worktop_maintenance_oil_mousse.php Woca worktop mousse is perfect for quick and easy maintenance on your oiled worktop. Whether covering a small worktop or a number of counter tops this mousse will save time and effort and keep your worktop in top condition. The mousse is available in either natural or white and is applied directly onto the worktop and rubbed in with a cloth. It can also be used on heavy use areas such as chopping boards and areas close to the sink which need extra protection. Sand the surface with 180 or 220 grit to ensure the correct surface for maximum oil penetration result. Make sure the wood is dry and avoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours. Shake the can thoroughly before use. Apply a suitable amount of Oil Mousse with a cloth in an even, adequate coat. Wait approx. 15-20 minutes at room temperature above 20°C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet, lengthwise of the wood grain with sandpaper 320-400 grit to produce optimum surface finish. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface. Polish the wood carefully using a white polishing pad, which ensures a harder wearing surface. Repeat the treatment on highly absorbent surfaces. The oil is thoroughly hardened after 24 hours at room temperature above 20°C. Do not let the worktop become wet during the hardening process. Maintenance cans come in 0.4L cannisters. Use Oil Mousse to maintain the tabletop as often as necessary. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/worktop_maintenance_oil_mousse.php Mon, 30 Aug 2010 23:01:08 +0200 http://realoakfloors.co.uk/trip_trap_oil_lacquer_ultra_matt.php Woca oil lacquer Woca oil lacqer, ultra matt, or silky matt oil lacquer gives a very hard wearing surface. The oil is quick drying and easy to apply. Oil lacquer is suitable for wooden surfaces, eg floors staircases, tables, shelves. Woca lacquer is available in two varieties, gloss and matt, ultra matt or silky matt. Coverage10m/litre infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_oil_lacquer_ultra_matt.php Mon, 08 Sep 2008 23:02:13 +0200 http://realoakfloors.co.uk/trip_trap_lacquer_care_high_gloss.php Woca Lacquer Care High Gloss and Matt Woca lacquer care high gloss lacquer care, water based lacquer care for the regular maintenance of lacquered surfaces, lacquer care strenghtens the lacquer as it protects against wear and scratches and hereby prolongs the lifetime of the lacquered surface. How to use Basic cleaning important mix wood cleaner with water in the ratio 1 to 10.Wash the floor thoroughly till the surface is completely clean.The floor must be absolutely dry before application of lacquer care. Application appply a thin coat of the concentrated lacquer care. If dirty rinse the cloth or mop in the clear water and wring it hard,Continue the application.Do not continue apllication of lacquer care when the floor has started to dry leave the surface to dry for appoximately thirty minutes. For regular cleaning of lacquered surfaces use woca soap. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/trip_trap_lacquer_care_high_gloss.php Mon, 08 Sep 2008 23:02:13 +0200 http://realoakfloors.co.uk/woca_stone_soap.php Woca Stone Soap Woca stone soap for cleaning stone ,marble and natural tiles, mix 125ml of stone soap with five litres of water for regular cleaning. Usage instructions Mix 125 ml Stone Soap with 5 l water for the regular cleaning. Clean the floor with a hard wrung out cloth or mop. It’s recommendable to use two buckets – one with the soap solution and one with clear water, in which you rinse the dirty cloth or mop. It is important not to leave any water on the floor. Use possibly little water to obtain a satisfactory result. Particularly dirty floors/stains may be removed with Spot Remover. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_stone_soap.php Mon, 08 Sep 2008 23:02:14 +0200 http://realoakfloors.co.uk/woca_stone_oil_natural.php Woca Stone Oil - Natural and White Woca Stone Oil Natural for the basic finish of untreated stone floors by hand or with machine. The Stone Oil has excellent penetration properties and therefore ensures a hard-wearing, dirt and water resistant surface. The Stone Oil enhances the natural structure of the floor. Stone Oil may be used indoors on all unfinished, open structured floors of stone, quarry tiles and marble. Stone Oil is available in the container size of 2,5 litre container and colours natural and white. Tools Needed A polishing machine of over 15m2 with beige polishing pad. Paint roller and cotton cloths. Clean tools in Solvent. Using stone oil An oil finishing with Stone Oil may be done either manually or by polishing machine. By stone surfaces of more than 15 m2 it is recommended to use a polishing machine. Clean with 125 ml Wood Cleaner mixed with 5L water. The floor must be completely dry and free from dirt and grease before the oil application. The oiling is done at min. 18° C. Shake oil container well before and during use. Apply the oil with a short-haired paintroller in an even coat onto approx. 5-10 m2 of floor. Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil. Excess oil is carefully removed or scraped onto next section of floor to be finished. The area is now polished with beige polishing pad under doodle-bug or with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections until the entire floor has been finished. After 6-8 hours the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100 ml Stone Oil to 20 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface. After 12 hours the floor may be used with caution. The surface is fully hardened after 36-48 hours. Do not expose the floor to water during the hardening time. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_stone_oil_natural.php Tue, 17 Mar 2009 23:07:51 +0100 http://realoakfloors.co.uk/woca_wood_floor_lacquer_matt.php Woca Wood Floor Lacquer Silky Matt or High Gloss Wood Floor Lacquer is a water-based, colourless lacquer, which does not go yellow and which gives a very hard-wearing surface. Wood Floor Lacquer contains no solvent, is odourless and quick drying. The product is suitable for all solid woodwork such as floors and stairs. Wood floor lacquer is available either Silky Matt or High Gloss. How to use Basic cleaning The wood must be completely clean, dry and free from resin, grease, oil, wax, lime and cleaning residues. Use Wood Cleaner for the thorough cleaning. Sanding of new wood surface: Sand with sandpaper grit 120. Remove any sanding dust from the surface with a vacuum cleaner before applying the lacquer. of wood surface to be re-lacquered: Remove loose chips and soap residues from the surface. Sand carefully with sandpaper grit 120. Remove any sanding dust from the surface with a vacuum cleaner before applying the lacquer. of surface with old lacquer too damaged to be repaired: Lacquered surfaces which are severely damaged must be levelled and sanded to bare wood. Start the sanding with sand- paper grit 36. Continue with grit 60, 80, 100, and end with grit 120. Remove any sanding dust from the surface with a vacuum cleaner before applying the lacquer. Preparation Stir the lacquer carefully before and during use. It is advantageous to apply a coat of lacquer to edges with a brush prior to the lacquering of the whole area. Lacquering First application: Apply a thin coat of lacquer with brush or lacquer roller. Leave the lacquer to dry for approx. 4 hours. Make intermediate sanding with sandpaper grit 120 after the drying time of 4 hours. Remove any sanding dust from the surface with a vacuum cleaner before applying the lacquer. Second application: Likewise apply a second thin lacquer coat with brush or lacquer roller. The lacquered surface may be used after 24 hours. The surface is completely hardened after 1 week. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_wood_floor_lacquer_matt.php Mon, 08 Sep 2008 23:02:15 +0200 http://realoakfloors.co.uk/woca_high_solid_master_oil_natural.php Woca High Solid Master Oil - Natural, White and Extra White Woca High Solid Master Oil Natural for initial oiling with machine of all wood species indoor. High Solid Master Oil is ideal for the basic finish of lye primed, unfinished, new or freshly sanded wood surface indoors. It is suitable for all wood species including cork. Generally used on dark wood species. Usage Instructions Content of solvent is less than 9%. High Solid Master Oil should be applied only by polishing machine. The unfinished woodwork should be freshly sanded with grit 100-120. Clean with 125 ml Wood Cleaner mixed with 5 l water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended wood moisture max. 12%. The oiling is done at min. 18° C. Shake oil container well before and during use. Apply the oil with a short-haired paintroller in an even coat onto approx. 10-15 m2 of floor. Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil. Excess oil is removed or scraped onto next section of floor to be finished. The area is now polished with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections until the whole floor has been finished. After 6-8 hours the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100ml High Solid Master Oil to 15 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. The surface is fully hardened after 36-48 hours. Do not expose the floor to water during the hardening time. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_high_solid_master_oil_natural.php Tue, 17 Mar 2009 23:04:58 +0100 http://realoakfloors.co.uk/woca_pre_colour_white.php Woca Pre-Colour White Pre-Colour is a water-based stain used for the priming of unfinished or freshly sanded interior woodwork i.e. floors, stairs, furniture and panels. Pre-Colour enhances the wood grain prior to a protecting oil or lacquer finish. Pre-Colour may be used on all types of wood. Usage Instructions The unfinished woodwork must be well sanded, clean and dry before application of the Pre-Colour. Clean with 125 ml Wood Cleaner mixed with 5 l water. Shake the container. Pour the Pre-Colour into a plastic bucket and stir regularly in order to obtain a uniform result. Apply the undiluted Pre-Colour in an even layer length wise onto the floor with a paint brush. Use at least 1l of Pre-Colour per 10 m2. On vertically mounted woodwork, apply from top to bottom. Clean tools in water. When the wood is dry, clean with Wood Cleaner and leave to dry or alternatively use green pad under floor machine and subsequently vacuum clean the floor. Finish the floor with Wood Floor Oil, Master Oil, Colour Oil, High Solid Master Oil or Oil Lacquer. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_pre_colour_white.php Mon, 08 Sep 2008 23:02:21 +0200 http://realoakfloors.co.uk/flat_mop_kit.php Flat Mop Kit Flat mop kit for applying all Woca oils and lacquers on wood flooring. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/flat_mop_kit.php Mon, 08 Sep 2008 23:02:23 +0200 http://realoakfloors.co.uk/woca_lacquer_soap_natural.php Woca Lacquer Soap Natural Woca Lacquer Soap Natural for cleaning of lacquered/painted surfaces and vinyl/linoleum. Very suitable for surfaces requiring frequent cleaning. infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_lacquer_soap_natural.php Mon, 08 Sep 2008 23:02:27 +0200 http://realoakfloors.co.uk/woca_water_based_decking_oil.php Woca Water Based Decking Oil Woca water based decking oil prides a hard wearing protective layer on wooden decking. This decking oil is available in natural, teak, black, grey, walnut, bangkirai and larch. Coverage: 12 - 15 m2 per litre. Using Decking Oil Treat new decking timber with oil before use. Clean thoroughly before starting the treatment. For old decks, clean before treatment using Decking Cleaner, then let the wood dry for approximately 24 hours. Make sure the wood is completely clean and dry. Sand down any wood fibres with fine sandpaper. Perform the treatment in dry weather only. Avoid direct sunlight and high temperatures. Stir the oil thoroughly before use. Apply the oil evenly using a brush or paint roller. Treat the crosscut ends first. Remove any excess oil with lean cotton cloths after no more than 20 minutes. Take particular care to remove excess oil from joints and grooves. If the surface does not appear to be saturated with oil, repeat the treatment. It takes 24 to 48 hours for the oil to harden completely, depending on weather conditions and outdoor temperature. The wood must not be exposed to water during this period. Available Colours Natural Teak Black Grey Walnut Bangkirai Larch infor@realoakfloors.co.uk, (Real Oak Floors) http://realoakfloors.co.uk/woca_water_based_decking_oil.php Tue, 17 Mar 2009 23:07:56 +0100