Woca Stone Oil - Natural and White

Woca Stone Oil - Natural and White is in the following categories Woca Oils & Lacquers (formerly trip trap oils) - Woca Finishing Products

Woca Stone Oil - Natural and White

Woca Stone Oil Natural for the basic finish of untreated stone floors by hand or with machine. The Stone Oil has excellent penetration properties and therefore ensures a hard-wearing, dirt and water resistant surface. The Stone Oil enhances the natural structure of the floor. Stone Oil may be used indoors on all unfinished, open structured floors of stone, quarry tiles and marble.

Stone Oil is available in the container size of 2,5 litre container and colours natural and white.

Tools Needed
A polishing machine of over 15m2 with beige polishing pad. Paint roller and cotton cloths. Clean tools in Solvent.

An oil finishing with Stone Oil may be done either manually or by polishing machine. By stone surfaces of more than 15 m2 it is recommended to use a polishing machine.

1. Clean with 125 ml Wood Cleaner mixed with 5L water. The floor must be completely dry and free from dirt and grease before the oil application. The oiling is done at min. 18° C.
2. Shake oil container well before and during use. Apply the oil with a short-haired paintroller in an even coat onto approx. 5-10 m2 of floor. Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil.
3. Excess oil is carefully removed or scraped onto next section of floor to be finished. The area is now polished with beige polishing pad under doodle-bug or with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
4. Continue in sections until the entire floor has been finished. After 6-8 hours the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100 ml Stone Oil to 20 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface. After 12 hours the floor may be used with caution. The surface is fully hardened after 36-48 hours. Do not expose the floor to water during the hardening time.

Customer Testimonials

"no problems, can highly recommend" received from our Online Store.

Solid Wood Flooring

• Oak prefinished
• Oak unfinished
• Walnut flooring
• Parquet flooring
• Ash flooring
• Wenge flooring

Engineered Wood Flooring

• Engineered oak prefinished
• Engineered oak unfinished
• Engineered beech
• Engineered walnut
• Engineered Wenge

Flooring Accessories

• Adhesives
• Solid oak skirting
• Underlays
• Floor cleaning
• Underfloor Heating
• Fitting accessories

Laminate Flooring

• Kronostep laminate flooring
• Quickstep laminate flooring
• Stainless Steel flooring
• Aqua Step waterproof

Wood Doors

• External oak doors
• External wood doors
• Internal oak doors
• Internal wood doors
• Internal walnut doors
• View Fold doors

Flooring Oils & Lacquers

• Bona oils and lacquers
• Osmo oils and lacquers
• Saicos oils and lacquers
• Woca oils and lacquers

Vinyl Flooring

• Karndean Vinyl flooring

Carpets and Rugs

• Kersaint Cobb carpets
• Rugs

Other Flooring

• Floor tiles
• Cork floor tiles
• Creative floor collection